Metal Roof Coatings

Metal Roof & Steel Building Coatings in South Florida

Metal roof coating seals the seams and fasteners on a metal roof, stops rust and reflects the sun with a seamless protective layer. In South Florida’s salt air and heat, it can add years to a metal roof or steel building without replacing panels. ProFoam & Coatings coats metal roofs and steel buildings across Broward, Palm Beach and Miami-Dade.








    Why metal roofs fail in South Florida

    Metal roofs move. Every day they heat up in the sun and cool down at night, and that movement loosens fasteners, wears out the washers that seal them and opens up the laps between panels. That’s where most metal roof leaks start.

    Near the coast, salt air speeds up corrosion. Once the factory finish wears through, rust spreads across panels, around fasteners and along seams, and eventually through the metal itself.

    Corrosion protection coating on a steel building

    What a metal roof coating system does

    Seals seams and fasteners

    Reinforced seam and fastener treatment where leaks start.

    Stops rust

    Rust-inhibiting primers and coatings protect the steel.

    Reflects heat

    A light-colored coating keeps the roof and building cooler.

    Seamless protection

    One continuous layer over the whole roof.

    No panel replacement

    Extends the life of the existing roof.

    Anti-corrosion coating on steel

    Coatings for steel buildings

    Beyond the roof, we coat steel buildings, structural steel and metal surfaces that need protection from corrosion, moisture and UV. Depending on the surface and exposure, that can include polyurethane and polyurea coating systems designed for demanding environments.

    For industrial surfaces like tanks, equipment and concrete, see our protective coatings.

    Stop the rust and leaks

    Call (954) 408-5332 or request an estimate online, and we’ll schedule a free inspection.

    Pairing coatings with insulation

    A coating protects the metal from the outside. Inside, many metal buildings also deal with heat and condensation dripping from the roof. Closed-cell metal building insulation sprayed on the underside of the panels stops that condensation at the source.

    Because we do both, we can plan the coating and the insulation as one project for warehouses, shops and barns.

    UV-resistant coating on a metal building

    Signs your metal roof needs a coating

    ✓

    Rust on panels, especially near seams, edges and fasteners.

    ✓

    Leaks at fasteners or panel laps after heavy rain.

    ✓

    Faded or chalky finish that has lost its protection.

    ✓

    A building that’s too hot under the metal roof.

    If you’re seeing any of these, a coating now can save the panels from replacement later.

    How a roof coating project works

    01

    Free roof inspection

    We inspect panels, seams, fasteners and rust, and check whether the roof is a good candidate for coating.

    02

    Written proposal

    You get the recommended system, scope, price and schedule in writing.

    03

    Prep and repairs

    We clean the roof, repair seams, flashings and damaged areas, and prime where the system calls for it.

    04

    Coating and walkthrough

    We apply the coating to the specified thickness, check coverage and walk the finished roof with you.

    Metal roof coating contractors near you

    ProFoam & Coatings is based in Pompano Beach and serves owners of metal roofs and steel buildings throughout Broward County, Palm Beach County and Miami-Dade County, including Miami, Fort Lauderdale, Pompano Beach, Boca Raton, Doral, Hialeah and West Palm Beach.

    Why property owners choose ProFoam & Coatings

    Veteran-owned and local

    A Pompano Beach company working only in South Florida’s sun, salt air and storms.

    Licensed and insured

    Every project is handled by our licensed, insured crew.

    Coatings and insulation in one place

    We can coat the roof and insulate underneath as one project.

    Straight answers

    If your roof is too far gone for a coating, we’ll tell you.

    Frequently asked questions

    Can you coat a rusty metal roof?

    Yes, as long as the metal is still structurally sound. Rust is cleaned and treated, and badly corroded areas are repaired before the coating goes on.

    Will a coating stop my metal roof from leaking?

    Most metal roof leaks start at fasteners and seams. Treating those areas and coating the roof seals them.

    Do you coat metal roofs on homes and barns?

    Yes. We coat metal roofs on commercial buildings, homes, barns, shops and outbuildings.

    How much does a metal roof coating cost?

    It depends on roof size, rust and repairs needed, and the coating system. We give a free written estimate after an inspection.

    Get a free metal roof coating estimate

    Call (954) 408-5332 or request an estimate online, and we’ll schedule a free inspection.